(3 reviews)

22 Circuit Budget Wire Harness


Product Description


Our 22 Circuit Budget Wire Harness is designed as a cut-to-fit universal complete restoration wire harness. These kits will support your entire electrical system from headlights to tail lights.

Whether you’re doing a brand new restoration from the ground up or just replacing the electrical wiring, our kits will provide an easy to install solution for your project!

Our budget kits support the same circuits as our standard kits, but do not include the fuse panel base plate, fuse cover, coil kill switch, built-in electric fan relay, or speaker wire.

Installation Support

Instruction Book

Every restoration wiring kit comes with an easy-to-use instruction book that walks you through every step of the installation. Our wiring kits are engineered for both the first time installer and the experienced auto electrician.

Toll-Free Phone Support

Along with easy-to-use instructions, every wire harness comes with toll-free installation support where you’ll be able to talk directly to our installation support team in Wisconsin.

Included Circuits

  • Hazard
  • Horn
  • Dome / Trunk Light
  • Cigarette Lighter
  • Fuel
  • Wiper / Electric Choke
  • Gauges
  • Electric Fan
  • Power Windows
  • Stop
  • Power Door Locks
  • Back-Up / Cruise
  • Headlights
  • Accessory
  • Radio Const. / Pwr. Ant.
  • Accessory
  • A/C + Heat
  • Radio Ignition
  • Turn
  • Coil
Made in USA

Proudly Designed, Engineered & Manufactured in the USA

All of our restoration wiring harnesses are manufactured in the USA. We’ve been doing it this way since our start in 1991.

We strongly believe in the value of maintaining American jobs and understand the quality of American made products can’t be matched anywhere else.


Adaptive Fit For Virtually Any Make & Model

Our kits are engineered to be compatible with virtually every make & model vehicle manufactured before 1979.

Almost all electrical components work the same across all makes & models which allows a Kwik Wire kit to adapt to your project. The electrical core of components like headlights, tail lights, gauges, starters, alternators, etc, work the same regardless if you’re building a GM or a Ford. They all need power and grounding. We engineer our kits to be adaptive to the vehicle it’s being installed which makes installation easy.

  • Buick
  • Cadillac
  • Ford
  • GM
  • Mercury
  • Mopar
  • Oldsmobile
  • Packard
  • Plymouth
  • Pontiac
  • Studebaker
  • More!

Included Accessories for Your Install

Installation Accessories
  • Ignition Switch Connector (1)
  • Ignition Switch Connector (1)
  • 14/16ga Butt Splices (6)
  • Headlight Connectors (2)
  • Headlight Connector Terminals (6)
  • 1/4" Terminals (10)
  • Instruction Manual
  • Fuse Panel Mounting Legs (4)
  • Column Plug Terminals (11)
  • 12/14ga Butt Splices (2)
  • Dimmer Switch Connector (1)
  • Alternator Plug (1)
  • 1" Firewall Grommet (1)
  • 6" Jumper Wire (1)
  • Early Model Column Connector (1)
  • Fuseable Link (1)
  • Fuse Panel Mounting Bolts (4)
  • Zip Ties
  • Ring Terminals (4)

High Quality Wire

We only use the highest quality GXL coated stranded wire in all of our restoration wire harnesses. GXL wire is resistant to moisture, grease, oil, gasoline, most acids and solvents. It has a temperature rating of -59°F (-51°C) to 257°F (125°C). Stranded wire enables more flexibility in routing of the wire and offers more durability for applications where vibration and occasional movement of the wire could cause breakage of a stiffer solid wire or rigid stranded conductors.

To assist with the install, we also print the number and destination of every wire included in the kit every 4 inches the entire length of the wire. The number assigned to the circuit as well as the label are indicated in the instruction book as well, so you'll never lose track of what wire goes where!

Labeled Every 4 Inches

Unique Features

The Best of the Best

The Best of the Best All of our kits were designed from the ground up with the goal of providing a quality American Made product that was affordable to our customers. Our kits are engineered and built as a universal cut-to-fit harness that will fit in virtually every make and model restoration while ensuring a perfect fit for your vehicle every time.

All of our harnesses come with a variety of features that all help make it the best kit on the market for automotive restoration. Below is a list of some of the unique features built into the design of our harnesses.

  • Engineered & Manufactured in the USA

    Engineered & Manufactured in the USA

    Our kits were designed from the ground up and each kit includes 25+ years of experience in the industry of engineering enhancements. Our wiring kits have also been proudly manufactured in the USA since our beginning in 1991.

  • Machine Crimped / Hand-soldered

    Machine Crimped / Hand-soldered

    We take the time to machine crimp & hand-solder every single terminal in our wire harness. You won’t find another kit on the market that gives this much attention to detail & quality to every single wire harness produced.

  • Universal Fit

    Universal Fit

    Our kits are designed to be a universal fit. The truth is that almost all components hook-up the same regardless of make. Headlights work the same as they do in Ford vehicles as the do in GM builds. Our kits have been put in just about every make and model you can think of!

  • Instruction Book Included

    Instruction Book Included

    An instruction book is included with every wire harness that walks through every single wire of the install. It’s easy to use and designed for even first-timers to use!

  • Toll-free Tech Support

    Toll-free Tech Support

    We understand that not everybody has a degree in automotive wiring, so we’re here to help you out if you run into any snags. Give us a call to talk to one of our expert tech’s. You’ll be talking right to the guys who actually make the kits in Wisconsin!

  • Thicker Gauge Wire

    Thicker Gauge Wire

    We pride ourselves by producing a quality product, and that starts with using quality materials. We use more copper in our kits than many of our competitors. This helps ensure the safety of our product and longevity for years to come.

  • Plenty of Wire Included

    Plenty of Wire Included

    Our wiring harnesses come with plenty of wiring for your build. The kits are designed as a cut-to-fit harness to ensure a perfect fit every time. Each kit comes with 25 ft of wire to the tail group so you’ll most likely have plenty of left-overs when you’re done.

  • Pre-wired Horn Relay

    Pre-wired Horn Relay

    Beep Beep! All of our kits come with a horn relay pre-wired into the kit so you don’t have to figure out how to wire it up later. The kit also comes with instructions on how to hook it up. You’ll be honking away in no time!

  • Full-size ATO Fuses

    Full-size ATO Fuses

    Some kits on the market cut corners by offering a fuse block that uses mini fuses. Mini fuses can be hard to come by when you need to replace a fuse the most. Our kits use full-size ATO fuses that you’ll be able to find at just about any gas station or hardware store.


22 Circuit Budget Wire Harness Reviews

Based on 3 reviews

Kwikwire beats painless

Posted by Ken Betcher on 10th Aug 2017

Quality equal to or better than any others and their instructions beats them all ! I will use no one else ever again. Great job you guys(and gals).

Good buy for the money

Posted by David on 27th Jul 2016

This harness is nice and cheap, makes it easy for a guy like me working on a college student budget. First thing I noticed was the quality of the craftsmanship. Kwik-wire made a good product. Only problem I had with it is when it arrived, the box liked like it went through world war 3 held together by at least an entire roll of packaging tape, either by kwik wire or the postal service. Second the fuse block is made of individual segments all put together into one block. This is not bad, and it makes sense from a manufacturing standpoint, but expect to take some time mounting it well. Or build your own backing plate like the higher end one does, it'll take 10 minutes in a well equipped shop. Also, adding a coil kill like their higher version has is simple. I addition you can run your own fuse or breaker to replace the fusible link easily (just sounds like a fire waiting to happen otherwise).

In total, great product for the money just spend a little extra time and it's just as good as their higher, non-budget harness.

wiring harness

Posted by Unknown on 3rd Mar 2016

this is the 2nd wiring harness I have ordered. very easy and it is easily marked so you can read what each wire is for.